Home About Us Products Servers Contact  



You are in Embedded Computing > Single Board Computers

ROBO-8713UGA
Intel® Pentium® 4 or Celeron® (D) processor based PICMG SBC with DDR 400 SDRAM, AGP 8X VGA, Gigabit Ethernet and Audio

ROBO-8713UGA Features

* Intel® Pentium® 4 processor with Hyper-Threading technology runs at 800MHz FSB
* ATI M10 graphics support dual view of LCD/CRT, TV/CRT, LCD/LCD and LCD/TV displays configuration
* Wire-speed Gigabit Ethernet based on Communication Streaming Architecture
(CSA) with double throughput than PCI based Ethernet
* Scalable graphics supports from Intel®
865 integrated Extreme Graphics 2 to ATI M10 graphics controller integrated 64MB display memory via AGP 8X
* Rich expansion capability thru proprietary PCI


ROBO-8713UGA Specification

CPU CPU & Package: Intel® Pentium® 4 or Celeron® (D) processor in the mPGA478 package
FSB: 800/533/400MHz
Chipset Intel® 865 and ICH5
Memory Up to 2GB dual channel DDR 400/333/266 SDRAM on two 184-pin DIMM sockets
BIOS Award BIOS
Display - ATI Mobility M10 graphics controller (ROBO-8713UGA)
* 64MB display memory
* TMDS & LVDS interfaces support
* Dual View support
* TV out
-Intel® 865 integrated Extreme Graphics 2.0 (ROBO-8713VGA)
Ethernet - 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet via CSA interface
- One RJ-45 connector with two LED indicators
Audio AC’97 2.2 Audio
Expansion Interface Proprietary PCI connection interface
ISA Bus 64mA high driving ISA bus interface to backplane
EIDE Support four EIDE devices with Ultra DMA 100/66/33
Solid State Disk - One Type II CF socket
- On secondary EIDE channel
- Bootable for no drives on primary channel
I/O - Support two SATA 150 devices
- Two serial, one parallel, one IrDA and four USB 2.0 ports (two on bracket)
- 8 high driving GPIO (programmable GPI or GPO)
- One 6-pin mini-DIN connector for keyboard and mouse
- One 5-pin header for external keyboard connection
ACPI Function - ATX function with 4-pin header connect to backplane
- Modem-Ring-On and Wake-On-LAN
Hardware Monitoring System monitor (fan, temperature, voltage)
Watchdog Timer Programmable via software from 0.5 sec. to 254.5 min.
Power Requirement Typical: +5V@6.0A; +12V(CPU)@5.7A; +12V(System)@0.8A
Mechanical Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
PCB : 8-layer
Environment Operating Temperature: 0 to 50oC
Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing
Approval CE, FCC Class A
MTBF 86,998 hrs

ROBO-8713UGA Ordering Information

* ROBO-8713UGA Socket 478 Pentium® 4 or Celeron® (D) processor based PICMG SBC with DDR 400 SDRAM, M10 w/ 64MB via AGP 8X, Gigabit Ethernet and audio
* ROBO-8713VGA Socket 478 Pentium® 4 or Celeron® (D) processor based PICMG SBC with DDR 400 SDRAM, integrated graphic, Gigabit Ethernet and audio
* ROBO-U160H SCSI extension module with Portwell OmniPCITM connection interface
* ROBO-N201G Single Gigabit Ethernet port extension module with
Portwell OmniPCITM connection interface
* ROBO-N201G2 Dual Gigabit Ethernet port extension module with Portwell OmniPCITM connection interface
* ROBO-N100P Single Fast Ethernet port extension module with Portwell OmniPCITM connection interface
DVI-D Cable TMDS adapter cable for DVI interface flat panel
* PA-M1ATU (ROBO-8713UGA)
Multimedia kit for P4 SBC with audio, TV out and USB ports
* PA-M1AU (ROBO-8713VGA)
Multimedia kit for P4 SBC with audio and USB ports
CABLE-HDD-SATA Adapter cable for hard drive type power connector to SATA power connector.


ROBO-8713UGA
Click image to enlarge

Get Price




 

Copyright UCS.co.uk 1997-2013. UCS is a trading name of Lilliput UK Ltd. Lilliput UK Ltd also operates: Car Computer, Cabcast

B Server