Home About Us Products Servers Contact  



You are in Embedded Computing > Single Board Computers

CAL-SBC-710VL
Full-size Socket 478 Pentium 4 SBC with VGA & LAN

CAL-SBC-710VL Introduction

Full-size Socket 478 Pentium 4 32bit/33MHz CPU Card with VGA & LAN.

CAL-SBC-710VL Features

  • Intel Socket 478 Pentium 4 CPU with 400MHz System Bus up to 2GHz+
  • Max 3GB Memory, 168-pin SDRAM DIMM x 3
  • Intel 845 Chipset
  • ATI Rage 128 Pro AGP 4X (1.5v) VGA controller with 16MB on die memory
  • Interl ICH2 Embedded MAC with Intel 82562EM (PLC) PHY 10/100 Ethernet controller


CAL-SBC-710VL Specification

System Architecture
Full size SBC with PCI/ISA Golden finger
Socket 478 Intel® Pentium® 4 processor with system bus at 400MHz
AGP 2.0 compliant
PCI V2.0 compliant
PICMG 1.0 (Rev. 2.0) compliant

CPU Support
Intel® Pentium® 4 processor with 256K cache on die
Socket 478 CPU running 400MHz system bus, CPU speed up to 2GHz or above

Main Memory
168-pin DIMM x3 Support Max. memory size to 3GB
ECC support (single bit error correction/Multiple bit errors reporting)
No Registered DIMM Support
BIOS
Award System BIOS
Plug & Play support
Advanced Power Management support
Advanced configuration & Power Interface support
4M bits flash ROM

Chip Set
Intel® 845 Chipset
Intel® 82801 x1 I/O Controller Hub (ICH2)
Intel® 82802 x1 Firmware Hub (FWH)
PCI V2.2 compliant

On Board VGA
ATI Rage 128 Pro (Ultra 4XL) VGA Controller, 1.5V AGP 4X interface
16MB VGA Memory on board
Fully PC98 and PC99 Compliant
15 pin CRT controller x1, 20 pin DVI connector x1

On Board LAN
ICH2 embedded MAC with Intel® 82562EM(PLC) PHY 10/100 Ethernet controller
single Chip 10/100 Base T/TX x 1 support, full duplex
Compliant with PCI V2.2, IEEE 802.3X
Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows® NT, Netware 5.0, SCO
Open Server 5.0, Linux
RJ45 with LED connector x1
Support Remote Monitoring (Alerting on LAN)

On Board I/O (ICH2)
ITE 8712F-A Server I/O
SIO x2, with 2 x 16C550 UARTs, 10 pin header x1, D-Sub 9 pin x1
PIO x1, bi-directional, EPP/ECP support, 26 pin connector x1
Floppy Disk controller: 34 pin connector x1
6 pin mini DIN connector x1, for PS/2 keyboard/mouse, 5 pin connector x1
(for external keyboard)
On board buzzer x1
GPIO (4 in 4 out)
On board 2 pin header for I2C
On Board 2 pin header for reset SW / 2 pin for IDE active LED / 2 pin ATX power SW
One 3 pins power header for 3 pins Power Cable connect to Backplane Board to support ATX

Power On function
On board 4 pin Additional Power Source Input

System Monitor
Derived from Super IO ITE 8712F-A to system monitor
8 voltages (For +1.8v, +3.3V, +5V, -5V, +12V, -12V, Vcore and Vcc5V Stand-By)
One Fan speed (For CPU), Two for System Fan
3 temperatures (one for CPU, the others for system)

ACPI Function
(only when 3 pins Power cable connect to Backplane which connect with ATX Power Source)
Soft Power off
Power On LAN
Power On Keyboard
Power On Ring

Real Time Clock
On chip RTC with battery back up
External Li Battery x1

Watchdog Timer
Watchdog timeout can be programmable by Software from 1~64 seconds

On Board Bus Expansion
On Board 32bit PCI interface for Upgrade Module

PCI to ISA Bridge & ISAMAX Support
ITE 8888F x1 PCI to ISA Bridge
Provide 64mA high driving capability to maximize ISA signals for support ISA cards up to 20 on
the backplane ISA Slot

Dimensions
338.58mm(L) x 122mm(W)

Power Requirements
+5V: 10A (Max.)
+12V: 10A (Max.)
-12V: 50mA (Max.)

Environments
Operating temperatures: 0°C to 60°C
Storage temperatures: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing)


Certification
CE approval
FCC Class A

CAL-SBC-710VL Ordering Information

CAL-SBC-710VL - Full-size Socket 478 Intel® Pentium® 4 Processor 32bit/33MHz CPU Card w/VGA/LAN


CAL-SBC-710VL
Click image to enlarge

Get Price
Download PDF




 

Copyright UCS.co.uk 1997-2013. UCS is a trading name of Lilliput UK Ltd. Lilliput UK Ltd also operates: Car Computer, Cabcast

B Server