Enter a product code or description
|Light Industrial PC Computer Case
Black Ox Introduction
The Black Ox has been designed to allow you to meet the requirements of a very broad range of applications with a single PC case. The Black Ox accepts ATX and baby AT format motherboards that accommodate up to 7 full length expansion cards. Larger systems can be configured utilizing passive backplanes that support up to 14 slots. A retaining bar is provided with the case to keep the cards in place during shipment and use. Power supply options range from the standard 230 watt supply up to a dual redundant 250 watt, hot swappable power supply system that supplies up to 450 watts in the load sharing mode.
The Black Ox's real versatility becomes evident when you consider the mounting options it provides. Use it in a vertical orientation with the included wall mount brackets to attach it to a wall or other vertical surface. Use it in a horizontal orientation with the rack mounting hardware to install it in just 4U (7") of standard equipment rack space. You can also use it as a desktop or mid-tower model by just adding the rubber feet supplied with the unit. No matter which mounting configuration you select, the rugged good looks of the Black Ox case tell your customers they have purchased high quality industrial equipment.
The Black Ox supports a large number of disk drives to provide configuration options not available on other 4U cases. It will accept up to four, externally accessible, 5 ¼" drives, plus one internal and one external 3 ½" drive. That's enough space to accommodate an internal hard drive, a floppy disk drive, a RAID 5 controller with 3 hot-swap drives, plus a CD ROM drive. All drives mount in a removable sub-chassis for easy system assembly and servicing.
Black Ox Specification
Steel NEMA 1 enclosure for light industrial environments
Compatible with ITOX ATX and Baby AT form factor motherboards;
also accepts ITOX 8 slot and 14 slot passive backplanes.
Standard model may be used as wall mount / rack mount / desktop / mid-tower.
16.6" (422 mm) high x 7.0" (178 mm) wide x 20.9" ( 530 mm) deep (wall mount). Includes brackets for mounting in 4U (7") of space within 19"
30 lbs. (13.6 Kg) , case with 230 watt power supply
6 total, protected by lockable disk bay access door
3.5" drive bays: 1 exposed; 1 internal
5.25"drive bays: 4 exposed
Front panel - 120 mm fan, with washable filter
Rear panel - 60 mm fan (exhaust mode)
Power supply fan - 72 mm fan mounted in standard power supply
Power supply - 230 watt, 115/230 VAC, 60/50 Hz switch selectable power supply
(See optional power supplies listed below)
3 total - Power, HDD, HDD
Front panel switches
Power switch, reset switch, uncommitted SPST rocker switch; behind lockable panel
Rear panel switches
Master power switch and input voltage selection switch on power supply
FCC, UL, meets CE requirements
300 Watt Supply: 300 watt, 115/230 VAC, 60/50 Hz switch selectable power supply
Redundant Supply: Hot swappable power supply system utilizing dual 250 watt power modules and a load
sharing device. Total combined capacity with load sharing is 450 watts.
115/230 VAC 60/50 Hz input, switch selectable.
Rack Mount Slide rails
Heavy duty ball bearing slide rails for mounting the Black Ox in 19" equipment rack; fits racks 24" to 32" deep.
Click image to enlarge